Record Bus

Forums › Forums › SQ Forums › SQ general discussions › Record Bus

Tagged: ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2018/07/08 at 5:47 pm #72474
    Profile photo of LaurenLauren
    Participant

    Can I set up a matrix as a record bus? If so how do I do that? I’m already using the 12 mix buses for in-ears. I don’t really understand what differentiates a mix from a matrix on this console.

    2018/07/08 at 6:42 pm #72477
    Profile photo of ddff_lvddff_lv
    Participant

    Afaik you can, just go to I/O patch and send the matrix to USB

    2018/07/08 at 6:47 pm #72479
    Profile photo of jakethepegjakethepeg
    Participant

    Hello Lauren,

    Channels send to Mixes. Mixes send to Matrices. A matrix allows multiple mixes to be summed and output through one set of L+R XLRs.

    You can record a matrix – set Matrix L + R as two of the USB patches (under Setup > IO Patch > USB Audio).

    (I use a Qu mixer but I presume the same applies to SQ)

    Regards,
    Jake

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.