Quick question.

Forums › Forums › Qu Forums › Qu troubleshooting › Quick question.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2016/05/27 at 9:37 pm #56126
    Profile photo of Anonymous
    Inactive

    I am taking delivery of a qu32 for my venue shortly. At the moment I have 3 FOH Xlr (L, R & M) but there are only 2 mains outputs on the qu32. Is there a way around this? I’m fairly new to all of this. Currently using a Allen and Heath zed 420

    Thankyou in advance.

    2016/05/27 at 9:41 pm #56127
    Profile photo of GCumbeeGCumbee
    Participant

    What is the M? A center speaker? You can feed it with an aux but preferably a matrix.

    2016/05/27 at 9:44 pm #56128
    Profile photo of Anonymous
    Inactive

    Yea running a central speaker. So if I run it through the matrix I can use the master fader with it and just treat it as a L R Master?

    2016/05/27 at 10:20 pm #56130
    Profile photo of GCumbeeGCumbee
    Participant

    Yes.

    2016/05/27 at 10:21 pm #56131
    Profile photo of Anonymous
    Inactive

    Brilliant. Thankyou so much for your help!

    2016/05/29 at 12:29 pm #56148
    Profile photo of Mike CMike C
    Participant

    I have no idea about your venue, what type of events you do or the system but sometimes creating a separate mix for the center channel can work very well. Maybe a vocal only, vocals with just a few select instruments, ect.

    This could be done a few different ways, building the center mix within the matrix, post fade aux mix, direct group out routing.

    You could do the same basic thing within your ZED420 now.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.