QU16 with ATEM Switcher

Forums Forums Qu Forums Qu DAW integration QU16 with ATEM Switcher

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of UKIman UKIman 1 year, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #91772
    Profile photo of UKIman
    UKIman
    Participant

    I have a QU16 with the latest firmware. I am unable to configure it to work the audio mixer on the Blackmagic ATEM 4M/E 12G.
    I have failed to get them to talk to each other through my MAC with Catalina. It work fine with the Behringer X-touch.
    The following is a link to the ATEM 3rd party audio.
    Any help would be appreciated.

    #91781
    Profile photo of SteffenR
    SteffenR
    Participant

    the X-touch is not talking to the Atem
    only to the software

    #91797
    Profile photo of UKIman
    UKIman
    Participant

    The Atem responds to Mackie codes, and the qu16 emulates Mackie. Other desks work, either the uq16 does, or does not work with the ATEM, I just don’t want to waste time if they are incompatible.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.