QU Pad – Channel Routing?

Forums Forums Qu Forums Qu general discussions QU Pad – Channel Routing?

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Techieboy Techieboy 4 years, 9 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #58793
    Profile photo of Techieboy
    Techieboy
    Participant

    Hi all

    Just a general question about the QU Pad app.

    Can you set channel routing via the app at all? For example, I have a mic connected to channel 9. On the QU32 desk I have routed to Groups 3/4. While in the auditorium I want to add it to groups 1/2 but I can’t find the routing page anywhere in the app.

    Many thanks

    #58795
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Tap the Group 1/2 button, click the ON button for channel 9.

    🙂

    #58797
    Profile photo of Techieboy
    Techieboy
    Participant

    Thanks for the reply Mark. I don’t quite understand I’m afraid. Where do you find ‘the on button for channel 9’?

    I can see the on buttons on the channel strips but they don’t seem to do anything to routing as such.

    Thanks

    #58798
    Profile photo of Techieboy
    Techieboy
    Participant

    Ahh.. I think I’ve got it…

    Select the channel strip then press the group 1-2 button in the mix select column, press on on buttons.

    Cheers matey. Pointed me in the right direction.

    Ta

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.