Qu-Drive used for Bluetooth Headphones out?

Forums › Forums › Qu Forums › Qu DAW integration › Qu-Drive used for Bluetooth Headphones out?

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 1 year ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2023/04/06 at 12:38 am #112298
    Profile photo of tom
    tom
    Participant

    Can i route my master fader (or headphone out) to the Qu-Drive usb – b port and insert a USB Bluetooth receiver which would pair to wireless bluetooth headphones?

    Sounds simple
    Thank you in advance!

    2023/04/06 at 1:06 pm #112310
    Profile photo of Mike C
    Mike C
    Participant

    I’m going to say no because the Qu Drive USB has multiple audio feeds present at it all the time you can change the patching source of those. For an input of sorts to the QU Drive it’s looking for a WAV audio file playing back from the USB stick.

    If you want to use your Bluetooth headphones get a small Bluetooth transmitter and connect it to the headphone jack.

    Keep in mind there may be a lot of delay on the Bluetooth audio connection.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.