Qu-32 & AR2412

Forums Forums Qu Forums Qu general discussions Qu-32 & AR2412

This topic contains 6 replies, has 4 voices, and was last updated by Profile photo of Mike C Mike C 3 years, 8 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #70675
    Profile photo of Lee
    Lee
    Participant

    Quick question: If I use a Qu-32 and an AR2412 together, do I get a total of 56 channels (on 2 layers) or is the total still 32 channels, with some on the AR2412 an some at the Qu-32?

    #70676
    Profile photo of GCumbee
    GCumbee
    Participant

    Total 32+6. 38 inputs counting ST 1,2,3.
    32

    #70677
    Profile photo of Lee
    Lee
    Participant

    Thanks for the quick response!

    #70682
    Profile photo of GCumbee
    GCumbee
    Participant

    I didn’t completely answer your question. Yes. You can have a mix and match of local and dSnake inputs. Can be selected and routed.

    #70698
    Profile photo of MarkPAman
    MarkPAman
    Participant

    … and to add to that, the input’s you choose to use can be saved in each scene.

    An example of this for me recently, was a wedding, where my Qu-16 was maxed out with the band, but they wanted 5 radio mics & backing track for the Bridesmaids to do a short performance after the speeches.

    #70710
    Profile photo of Mike C
    Mike C
    Participant

    You can get a few extra XLR mic inputs using a stage box and routing some of the box inputs to the stereo input channels.

    #70711
    Profile photo of Mike C
    Mike C
    Participant

    Maybe it’s just me but I find it’s easier to set up stage boxing and input routing using QU Pad rather than the mixers touch screen.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.