PAFL on Matrix

Forums › Forums › iLive Forums › iLive troubleshooting › PAFL on Matrix

Tagged: 

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of DavidCo DavidCo 7 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2016/11/17 at 2:40 am #59362
    Profile photo of Kyle
    Kyle
    Participant

    I’ve recently ran into an issue using the PAFL feature while mixing on a Matrix. On my Broadcast mixing location, my monitors are being fed by a stereo Matrix and I’m trying to “solo” certain channels and it doesn’t work. Is there a quick fix to this issue?

    2016/11/17 at 3:22 pm #59373
    Profile photo of SteffenR
    SteffenR
    Participant

    this is not an issue

    solo only works on the dedicated solo bus
    you can configure the wedge stereo output to have it on a fader
    but this eats up two extra outputs

    2016/11/17 at 3:36 pm #59374
    Profile photo of DavidCo
    DavidCo
    Participant

    Have you considered feeding your control room from the PAFL bus?

    DC

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.