Output Routing

[FCWC]

Understand Input Routing.
But is the Output also routable?
IE can I have an Input routed to Output 6 only. Then have Out 6 routed to main?
So that I dont have to use another Input to physically route it.

[Smilzo]

Short: no “routable”.

The routing are fixed, each input is routed to main and out 1-6 (and fx). You can choose levels. You can have input “i” into each out (for example input 1 into mains, out 1, out 2, out 3 and out 6).

[FCWC]

Thanks.
Assumed but HOPED.
I will jump out to another input for now.

[Smilzo]

I will jump out to another input for now.

There’s a wish in the feature suggestion section for “split” the same input into different input channels. You can support the request…
There are also request for an I/O matrix (seems like there are limits to the number of different mixes, but maybe routing already processed input into different channels and outs could be doable…).

[FCWC]

Was just about to post Routable Outputs as a suggestion.
Will look for the split suggestion first.

[Author]

Posts