New Avantis Installation

Forums Forums Avantis Forums Avantis General Discussions New Avantis Installation

This topic contains 5 replies, has 5 voices, and was last updated by Profile photo of atrakce atrakce 1 year, 4 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
  • #97975
    Profile photo of Kris

    Hi There,
    We’re about to do an Avantis installation and I’m looking for those well versed in the A&H’s ecosystem to make sure I’m understanding what I’m seeing.

    Will any of these two diagrams work, is there an easier way?

    You must be logged in to view attached files.
    Profile photo of Showtime

    The ar84 isn’t gonna work, dx busses are 96khz

    Why not a gigaace card? It’s cheaper

    Profile photo of SteffenR

    The AR84 is not compatible with the rest of the setup…
    You can’t use 48kHz Stageboxes on the DX port.

    Profile photo of Kris

    Ah okay, so the stage boxes can’t be clocked at a lower sample rate then?
    Every I/O needs to be clocked at the native build?

    Profile photo of Mfk0815

    Even if the two will runon the same sample rate it would not work because they are working with different protocolls. The DX012 and other DX stageboxes are using the DX protocol but the AR084 is working eith the dSnake protocol, and those protocols are incompatible. On an SLink Port you can use devices with either dSnake, DX or gigaACE protocol, but only one protocol at once. No mix is allowed.

    Profile photo of atrakce

    Use GigaAce card for connecting GX4816 and built Slink for 48KHz expanders on Dsnake protocols (AR84, AR2412, AB168).

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.