Naming Inputs

Forums Forums GLD Forums GLD general discussions Naming Inputs


This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of  Anonymous 4 years, 8 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #86620
    Profile photo of

    I’m new to the A&H GLD112 so running the editor at home and looking at videos etc. One thing I can’t find; Under I/O I can see what amounts to a picture of our AR2512 with some assignments such as “Pulpit”, “Mic 1” and so on. But if I go to the AR2412 and route a new XLR input to a empty socket – how do I enter a useful name that socket in the I/O screen? (and one I’ll eventually see above the fader strip)

    Profile photo of SteffenR

    Klick on the Name in the processing window

    Profile photo of Chris93

    You don’t name the sockets, you name the input channels. The I/O page shows you the name of the channel that a socket is patched to.

    You can either do the patching from the I/O page by selecting a socket and choosing which channel to route it to. You can also select a channel, and choose it’s source from the preamp tab under processing. This is the only way I’m aware of to patch one socket to multiple channels.


    Profile photo of

    Ok guys, got it – thanks.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.