Mute instrument from FOH but still have it recorded

Forums › Forums › CQ Forums › CQ General Discussions › Mute instrument from FOH but still have it recorded

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of SkypeLee SkypeLee 6 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023/10/16 at 10:46 am #115730
    Profile photo of SkypeLee
    SkypeLee
    Participant

    I know this sounds a bit strange but… Using the CQ-12t in our rehearsal space and the instrument in question is my drum kit. I want to record our sessions in full mix but don’t want it to come out of the speaker we use for the monitoring.The speaker is connected to one of the main “outs”. Sorry for the noob quesion, not a mixing engineer here as you can tell 🙂

    2023/10/16 at 10:53 am #115731
    Profile photo of Scott
    Scott
    Participant

    Don’t mute the channel, instead turn the fader all the way down. Also make sure that your tap point is somewhere before the fader (I don’t recall if CQ can even be set post fader).

    2023/10/16 at 12:46 pm #115739
    Profile photo of SkypeLee
    SkypeLee
    Participant

    OK, I’ll try that. Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.