Mounting To a rack-top

Forums Forums SQ Forums SQ general discussions Mounting To a rack-top

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of PeterH PeterH 1 week, 4 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #86330
    Profile photo of PeterH
    PeterH
    Participant

    Hi,

    I would like to mount our SQ5 on top of a 19″ rack.
    Can I simply mount it to the ‘floor’ using the screwholes in the bottom of the SQ5?
    Or do I need some kit or spacers to do that?

    #86332
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Peter,

    Something important to bare in mind when doing this is air flow, as there are fans underneath the SQ, as well as vents at the top and front.

    So as long as the is a sufficient air gap at the positions it should be fine.

    Thanks!
    Alex

    #86339
    Profile photo of PeterH
    PeterH
    Participant

    So leaving the current rubber knobs and adding some spacers of the same thickness around the screws should do the trick.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.