More latency with AR2412

Forums Forums SQ Forums SQ troubleshooting More latency with AR2412

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of ioTon ioTon 2 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #87159
    Profile photo of Alex

    Hey guys,
    Can it be possible that it takes longer for the signal to be delivered from the digital stagebox compared to the internal preamps?
    I discovered this by mixing both inputs, from the SQ5 and the AR2412.
    After having phase issues with a two mic setup just by changing the Input i measured it with a split cable and recorded their tie-lines.
    The outcome? The exact same signal took 32 Samples longer from the AR2412 and had 0,3 dB lower volume.
    Is this logical?

    Profile photo of Mfk0815

    The SQ must do a sample rate conversion for the 48 kHz on the AR2412 to the inter 96kHz. I guess this will cause the extra latency

    Profile photo of ioTon

    Here’s the result of some measurments on my SQ5 + AR2412.

    Analog Insert Latency (average) ?


Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.