Mono LR out QU-PAC?

Forums › Forums › Qu Forums › Qu general discussions › Mono LR out QU-PAC?

This topic contains 6 replies, has 3 voices, and was last updated by Profile photo of Dick Rees Dick Rees 6 years, 5 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 2017/11/05 at 8:45 pm #66130
    Profile photo of lbertinelli
    lbertinelli
    Participant

    Hello

    Is it possible to mix in mono? How can I select the LR out to be mono? I can see that if I am using the ar2412 I can patch two outputs as L+R. but what about if I am not using the ar2412?

    Thank you

    2017/11/05 at 9:04 pm #66131
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Alt Out: select “L+R” from Output Patch menu.

    2017/11/05 at 9:05 pm #66132
    Profile photo of lbertinelli
    lbertinelli
    Participant

    i see that but I want to use the main LR fader

    2017/11/05 at 9:07 pm #66133
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Alt Out follows the Mains fader. Set the Alt Out pot to the arrow/zero/unity marker.

    Try reading the manual while at the board.

    2017/11/05 at 9:32 pm #66135
    Profile photo of lbertinelli
    lbertinelli
    Participant

    I see. Thank you

    2017/11/05 at 9:41 pm #66137
    Profile photo of GCumbee
    GCumbee
    Participant

    Pan all channels to Center.

    2017/11/05 at 11:06 pm #66139
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Pan all channels to Center.

    And since that’s the default setting it’s eezy-peezy.

    The reason I feed my PA summed L/R from the Alt Out is so I can solo two or more channels and do compimentary EQ’ing panned in the cans without the panning messing with the live sound.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.