Led pannel for SQ-5

Forums › Forums › SQ Forums › SQ general discussions › Led pannel for SQ-5

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 2020/10/02 at 10:17 am #95364
    Profile photo of jb07jb07
    Participant

    Is there an application to have the level of the input signals in order to have a led pannel?
    A Raspberry type assembly also interests me.

    Thanks

    2020/10/02 at 12:44 pm #95367
    Profile photo of SteffenRSteffenR
    Participant

    What you mean? Don’t understand…

    2020/10/02 at 1:25 pm #95371
    Profile photo of jb07jb07
    Participant

    I would have liked to have a led strip above the console to see the input levels.

    2020/10/02 at 1:32 pm #95372
    Profile photo of Mike CMike C
    Participant

    Do you mean like a meter bridge?

    You could set up an Ipad up with the SQ app on it opened to the metering page.

    2020/10/02 at 1:43 pm #95374
    Profile photo of MarkPAmanMarkPAman
    Participant

    Many people seem to use a tablet running the QuPad app or Mixing Station to show metering.

    2020/10/02 at 2:42 pm #95375
    Profile photo of jb07jb07
    Participant

    is there only the sq mix pad application available?

    2020/10/02 at 3:12 pm #95377
    Profile photo of MarkPAmanMarkPAman
    Participant

    No, Mixing Station, which is a third party app, works with many desks, including Qu & SQ.

    2020/10/02 at 5:15 pm #95382
    Profile photo of tourtelottourtelot
    Participant

    +1 for Mixing Station on a tablet. Nice app.

    D.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.