How to assign A/B out

Forums Forums SQ Forums SQ general discussions How to assign A/B out

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Mfk0815 Mfk0815 1 year, 5 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #92483
    Profile photo of Matthew D
    Matthew D
    Participant

    Hello,

    I am just wondering how to assign the outputs of the A/B out on the SQ7.

    #92484
    Profile photo of SteffenR
    SteffenR
    Participant

    with the patching? I/O screen?

    #92485
    Profile photo of Matthew D
    Matthew D
    Participant

    I did not see the option for it in the I/O screen. Maybe you could enlighten me

    #92486
    Profile photo of Matthew D
    Matthew D
    Participant

    Ah, I found it! Thanks!

    #92487
    Profile photo of Mfk0815
    Mfk0815
    Participant

    On the IO screen you can define for each output (like local, slink, usb or the card) the source. This can be busses, direct outs, tie lines or the monitors.
    You just have to choose the right categories and then click on the intersection to assign your signal to the output of your desire.
    Also a good idea would be to look a little closer into the manual.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.