HF/LF Shelf Filters on Input Channels

Forums Forums SQ Forums SQ feature suggestions HF/LF Shelf Filters on Input Channels

This topic contains 7 replies, has 3 voices, and was last updated by Profile photo of Scott Scott 1 year, 10 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #88826
    Profile photo of harrisonhal266
    harrisonhal266
    Participant

    It would be nice to be able to swap the LF and HF channel strip input PEQs to be able to be shelving EQs

    #88828
    Profile photo of Mfk0815
    Mfk0815
    Participant

    This is already possible. Select the Bandwidth (Q) Parameter of the lowest or highest band and use the encoder to change the value to the lowest or highest possible value. Then it changes the type to shelfing.

    #88829
    Profile photo of harrisonhal266
    harrisonhal266
    Participant

    That’s not a true shelf…

    #88836
    Profile photo of Mfk0815
    Mfk0815
    Participant

    Hmm, what would be a “true shelf” for you?

    Attachments:
    You must be logged in to view attached files.
    #88842
    Profile photo of Scott
    Scott
    Participant

    SIDE NOTE: You can only switch into shelving mode on the touch screen, not on the rotary controls.

    #88847
    Profile photo of harrisonhal266
    harrisonhal266
    Participant

    Needs to be a variable size shelf to be as steep as a LPF

    #88855
    Profile photo of Mfk0815
    Mfk0815
    Participant

    A low or high pass filter is something completely different than ha shelf filter. But the good news is that you do not need to wait too much longer because it should be included in FW 1.5

    #88877
    Profile photo of Scott
    Scott
    Participant

    Pass-filter mode coming in firmware 1.5. This was demoed at the winter NAMM show. There is another topic here on just that.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.