Fix return Post Fader

Forums Forums SQ Forums SQ general discussions Fix return Post Fader

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of ioTon ioTon 1 week, 3 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #110067
    Profile photo of myannis
    myannis
    Participant

    Hi
    I am wondering how I can return Fx to an Aux post fader when digital share one input
    For example:
    Channel 1 is a mic for LR
    Channel 2 is the same physical input mic but for sending it to Aux only
    Fx1 is post fader and the FX for LR
    FX2 is only for Aux
    How can I send the “in” channel 2 that is only for Aux post fader to the in FX?

    #110083
    Profile photo of ioTon
    ioTon
    Participant

    You have to switch the channel off the main bus via the routing tap.
    When this channel isn’t assigned to the main bus, you can adjust the GX with the fader.

    Greetings,
    Jo

    Attachments:
    You must be logged in to view attached files.
    #110085
    Profile photo of ioTon
    ioTon
    Participant

    Or use the “Assign” key left to the display s plus the “Sel” of the channel.
    greetings

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.