Fine granular input patch safe

Forums Forums dLive Forums dLive feature suggestions Fine granular input patch safe

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Jgrift Jgrift 1 year, 5 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #107219
    Profile photo of davidgiga1993
    davidgiga1993
    Participant

    It should be possible to set the input patch for a specific channel to “safe” so the input routing for this particular channel doesn’t get changed by a scene recall.

    This is already available for the SQ mixers and not having it on gld/dlive/avantis is really unfortunate.

    (I’ve posted this in the avantis forum as well since it should be available for both mixers)

    #107223
    Profile photo of RS
    RS
    Participant

    Output routing should be selectable per output and not globally as well….

    #109164
    Profile photo of Brian
    Brian
    Participant

    +1000 on this.

    I find it really frustrating to not be able to safe particular channels against routing patching changes. Is is about as basic a scene safe as it gets IMHO.

    #109168
    Profile photo of Jgrift
    Jgrift
    Participant

    I agree this would be a good feature for the desk. Would a work around be to use ABCD to source select in the scene? It does have recall scope for each input.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.