Ethernet Cable

Forums › Forums › GLD Forums › GLD general discussions › Ethernet Cable

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Sound Doctor Sound Doctor 10 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2013/12/18 at 7:29 pm #36908
    Profile photo of GSLC-Tech
    GSLC-Tech
    Participant

    We are going to run ethernet cable from our ME-U PoE to the ME-1’s on stage. The run is between 75 and 100′ I need some suggestions for cable. One of the guys I’m working with suggested Belden 1583A-1000 (https://www.fullcompass.com/product/278534.html). My trusted rep from Full Compass suggested I go up to the Belden 1533R-1000 (https://www.fullcompass.com/product/383084.html). I know it would be easier to put the PoE near the stage, but that’s not going to happen.

    2013/12/19 at 4:39 pm #36932
    Profile photo of Sound Doctor
    Sound Doctor
    Participant

    I would go with the sheilded cable, particularly with a long run you describe. Not likely you will get interference, but better to be safe than sorry.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.