equalisation buttons

[jb07]

pity that the colors of the equalization buttons (LF, LM, HM, HF) do not correspond with the screen (sky blue / purple / blue / red) the colored LEDs look fixed?

[KeithJ A&H]

@jb07,

You’re right, that could have looked pretty nice!
But… you’re also right that they are fixed amber/orange so this cannot be changed (in firmware at least).

Thanks,
Keith.

[Smalldevel]

Maybe it can be helpfull to mark the bands with LM / HF and so on, on the screen, cause for colorblind people like me it’s not possible to identify the correct band for a quick softbutton controll.

[ioTon]

Another suggestion:

Please open the PEQ screen when pressing one of the 4 PEQ Band Buttons.
The screen will open when turning one of the 3 Encoders – but by pressing the Buttons there is no Response – wondering why not…

thanks!
dd

[KeithJ A&H]

@ioTon – that’s a good point and noted.

[The reason btw, is that ‘screen follows surface’ is based on the changing of values and when you change the band for the PEQ controls you’re not affecting any values]

Thanks,
Keith.

[jb07]

I got around the problem …

Attachments:

You must be logged in to view attached files.

[Wolfgang]

a very creative solution 😉

[Author]

Posts