DT20 and DT02 Connectivity

Forums › Forums › Other A&H products › DT20 and DT02 Connectivity

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2024/04/14 at 7:26 pm #121342
    Profile photo of eman43078eman43078
    Participant

    Hello All,
    I’m having an issue here these two permanently installed devices will stop receiving / transmitting sound. They are poe powered so they stay on all the time. When I power up the SQ6 and the DT168 and
    DT164-W everything connects and works fine, but the DT20 and DT02 I have to unplug the network cable and plug back in essentially rebooting the devices before they start receiving / transmitting sound. Dante controller shows both devices connected before and after reboot. Very strange. Thanks everyone.

    2024/06/09 at 3:37 pm #122785
    Profile photo of Shakenjake86Shakenjake86
    Participant

    I am having a similar issue. My DT20 keeps randomly muting itself and then i have to reboot it.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.