Dante SQ7

Forums Forums SQ Forums SQ general discussions Dante SQ7

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of nottooloud nottooloud 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #118311
    Profile photo of e.49ersfan
    e.49ersfan
    Participant

    I’m currently using a Behringer X32 mixer for my FOH. I will be going to an SQ-7 for FOH and the X32 will still be used behind stage for another purpose. If I have the X32 on and then I turn on the SQ-7, I can hear popping in main speakers and monitors. Both mixers are using Dante and configured correctly. I made sure of this through Audanate. They told me to contact desk manufacture to see if you had an idea. I don’t have any Dante speakers or monitors. This only happens when I turn on the SQ-7 last. Any ideas?

    #118377
    Profile photo of nottooloud
    nottooloud
    Participant

    This only happens when I turn on the SQ-7 last. Any ideas?

    I don’t mean to be snide, but don’t do that. Power amps are always the last thing on. This is why.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.