Dante control of Neutrik boxes

Forums Forums SQ Forums SQ feature suggestions Dante control of Neutrik boxes

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Wolfgang Wolfgang 5 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #96816
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    It could be neat when using Dante, to be able to control Neutriks NA2-IO-DPRO 2 in 2 out module.

    When having a few smaller rooms scattered, it could at times be smarter to have 2-3 of these units scattered than having a central unit and a lot of analog cableruns.

    #96817
    Profile photo of Showtime
    Showtime
    Participant

    Yes and also for dlive and avantis….

    #96826
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Not exactly addressing your suggestion, but topical nonetheless – make sure you tune in to our ‘Deeper into Dante’ webinar next week.
    Registration links for the two sessions here:
    https://zoom.us/webinar/register/WN_nf2WLwlMQE6–NET9X_W_w
    https://zoom.us/webinar/register/WN_faLKLqEkST6HWivnMlf-GQ

    #96844
    Profile photo of Wolfgang
    Wolfgang
    Participant

    We also just ordered DT168 and two Neutrik NA2-IO-DPRO 2. The Neutriks are to be used for simple feeds or anything else from other rooms or other room areas.
    That’s why we would be happy if you could control it via dLive and SQ.

    The videos are not much use to me, though, since I have a different mother tongue and the spoken English is just too fast for me 😉

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.