copy paste fader

Forums › Forums › Qu Forums › Qu general discussions › copy paste fader

Tagged: 

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of britz britz 7 years, 2 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2017/02/22 at 9:46 am #61520
    Profile photo of britz
    britz
    Participant

    hi, i wanted to know if you can copy the fader setting from the L R mix to mix 1 or any other mixes from 1 to 10?

    2017/02/22 at 11:25 am #61522
    Profile photo of J3phMP
    J3phMP
    Participant

    I found it easiest with my I pad. Double tap on LR EQ screen copy/ paste prompt will show up. Select copy. Go to your mix EQ process screen and double tap. Choose paste.

    2017/02/22 at 1:51 pm #61526
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    What do you mean by ‘fader setting’. Just the position of the fader?

    If you want to keep the position updated all the time then a post fade with a post fade send at unity will do the job.

    If you want a one off copy then you can use the master mix select button to copy send levels, assignment and pan.

    Page 37 of the manual.

    2017/02/22 at 4:31 pm #61527
    Profile photo of britz
    britz
    Participant

    thanks Bob for your prompt reply

    2017/02/22 at 4:31 pm #61528
    Profile photo of britz
    britz
    Participant

    Thank you so much

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.