Confused about the output level.

Forums › Forums › GLD Forums › GLD general discussions › Confused about the output level.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2017/12/31 at 3:37 am #67241
    Profile photo of Chris93Chris93
    Participant

    In the manual under dBFS alignment it says “+18dBu = 0 dBFS (+22dBu at XLR output)”. How does this have two different figures in the same units?

    Should it be +18dB meter = 0dBFS = 22dBu?

    Thanks,

    Chris

    2017/12/31 at 8:21 pm #67343
    Profile photo of GCumbeeGCumbee
    Participant

    I think that may be a typo. Should be -18. That would mean -18 = 0db with a +22 max at the connector.

    A lot of digital protocol is based around -12 to -18 = O

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.