CDM48 will not update software with laptop

Forums › Forums › dLive Forums › dLive troubleshooting › CDM48 will not update software with laptop

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of RS RS 10 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023/05/28 at 5:27 pm #113071
    Profile photo of Fleece
    Fleece
    Participant

    Hi
    I’m trying to update the software on my Cdm48 with a laptop and no surface .
    Following instructions by connecting laptop to CDM with network cable .
    And the typing Ip 192.168.1.70 into my web browser as instructed.
    Keep getting the same response can’t reach this page ?
    Any advice as I’m totally stuck in a loop .

    2023/05/29 at 8:37 am #113075
    Profile photo of SteffenR
    SteffenR
    Participant

    Could it be that someone changed the network address of the mixrack?
    You can reset the network to its default.

    Or, try to use Director to link to the Mixrack, you can read out the IP.

    2023/05/29 at 9:07 am #113076
    Profile photo of RS
    RS
    Participant

    What firmware version are we talking about?

    A&H changed the process for updates on surface-less setups. Since version 1.9 it is not done via web browser anymore, but thru Director instead.
    Read the release notes!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.