Scenes/shows – setup question

Forums › Forums › GLD Forums › Archived GLD Discussions › Scenes/shows – setup question

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Stix Stix 11 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2012/08/21 at 9:18 pm #23263
    Profile photo of gkhewitt
    gkhewitt
    Participant

    Hi folks

    Just a sanity check…

    We are running our GLD in two modes – Live and Dante.

    In Live mode, all the inputs are patched from the audio racks with Direct Outs to Dante.

    In Dante mode, all the inputs are patched from Dante.

    At the moment we have this setup in two separate shows as I don’t think that you can configure IO and save it in a scene?

    Ideally I’d like to have a ‘Dante’ scene (or even user with default Dante scene) that can be easily recalled from softkey to quickly switch between modes. Mainly the problem is that if a user loads the Dante show for virtual soundcheck and then forgets to switch back to the live show afterwards, a guest user can come along and not know why none of the inputs are working properly (defaults to last show).

    Cheers

    2012/08/22 at 2:34 am #31184
    Profile photo of Stix
    Stix
    Participant

    You can switch the input patching only and have this stored in a scene – just edit the scenes ( Live and Dante playback) to only contain the patchbay. Store the Live scene with normal inputs and the Dante scene with Dante inputs feeding channels. All other settings will be then left alone. Makes using the virtual soundcheck very easy!

    Cheers

    Richard Howey
    Audio Dynamite Ltd
    IDR48/IDR16/T112/R72/Mixpad,Tweak,
    Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.