Ok, situation came up on new years eve.
Had an I-Live 112 at FOH and I was mixing monitors on stage using a laptop.
first 32 channels were for FOH and the second 32 were mapped for monitors so I had seperate processing.

Now FOH guy didn’t want to recall a scene for each band and preferred to just mix it on the fly, however I wanted to save a scene that had the aux send fader positions for each band so I could recall.

Now I could save the processing settings for channels 33-64 easy, but I could’t figure out how to save only the fader positions for each aux send as a seperate scene.

Can anyone advise if this is possible.

Cheers
Toby