dLive Firmware V2.02

Forums › Forums › dLive Forums › dLive General Discussions › dLive Firmware V2.02

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • 2024/10/29 at 1:30 pm #126927
    Profile photo of Jack_AHJack_AH
    Moderator

    We’ve just released dLive V2.02

    Download it – https://www.allen-heath.com/hardware/dlive-series/all-models/resources/



    Read about it – https://www.allen-heath.com/content/uploads/2024/10/dLive-Release-Notes-V2.02.pdf

    2024/10/29 at 1:34 pm #126928
    Profile photo of slimediaslimedia
    Participant

    Have you updated the MixPad app to include FX control and assignment?

    2024/10/29 at 4:28 pm #126937
    Profile photo of BrianBrian
    Participant

    Great work!

    2024/10/31 at 11:56 am #126972
    Profile photo of RSRS
    Participant

    Right clicking on soft rotaries and entering values in Director is still broken here. Not listed under “known issues” either.

    2024/11/04 at 1:50 pm #127066
    Profile photo of BrianBrian
    Participant

    I had no trouble right clicking in Director and entering a specific value. You need to right click on the numerical value listed below the rotary however, not the actual rotary knob itself. Perhaps this is the disconnect you are experiencing.

    2024/11/04 at 5:08 pm #127074
    Profile photo of SteffenRSteffenR
    Participant

    Right-clicking the values is working on three different devices here. I use Windows.

    2024/11/04 at 7:11 pm #127080
    Profile photo of RSRS
    Participant

    The problem is with aux/FX sends. Both on win and Mac. It’s acknowledged by A&H, but not in the “known issues” list.

    2024/11/04 at 7:15 pm #127081
    Profile photo of RSRS
    Participant

    Proof video….

    2024/11/05 at 12:33 am #127085
    Profile photo of RSRS
    Participant

    Sorry, had to reduce size of the video first….

    Attachments:
    You must be logged in to view attached files.
    2024/11/05 at 9:34 am #127089
    Profile photo of SteffenRSteffenR
    Participant

    Ok, I can confirm it, after I watched your video.
    Hope it gets fixed in the next update.

    Not a showstopper to me.

    2024/11/10 at 12:34 pm #127177
    Profile photo of EQUIPPERSEQUIPPERS
    Participant

    Hi,
    We experienced fader problems with the new firmware. During Scene Changes with crossfade time – the fader stuck. We can’t change to the previous firmware-version, because it is not available in the download area…
    Please, can you fix that?
    Cheers
    Johannes

    2024/11/18 at 2:42 pm #127348
    Profile photo of msteelmsteel
    Participant

    Have you tried recalibrating faders since the update? I’m not sure where the fader calibration is stored, but it is conceivable that an update might change the stored values.

    If you do want to roll back to a previous version, I am seeing options in the dropdown on the right of the download page for lots of previous versions, including 2.10 and 1.9A.

    2024/11/18 at 9:19 pm #127370
    Profile photo of EQUIPPERSEQUIPPERS
    Participant

    The V2.01 is now available. I will downgrade until A&H fixes the bugs.
    Thanks!

    2024/11/18 at 9:29 pm #127371
    Profile photo of BrianBrian
    Participant

    Just FYI – 2.01 is a lot more buggy than 2.02! I suspect downgrading to 2.01 isn’t going to fix anything, and may actually cause more problems.

    2024/11/18 at 9:35 pm #127372
    Profile photo of EQUIPPERSEQUIPPERS
    Participant

    we ran 2.01 without any issues – upgrading coused problemes – in our usecases. But thanks for your reply!

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.