dLive Firmware V2.02

Forums Forums dLive Forums dLive General Discussions dLive Firmware V2.02

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #126927
    Profile photo of Jack_AHJack_AH
    Moderator
    #126928
    Profile photo of slimediaslimedia
    Participant

    Have you updated the MixPad app to include FX control and assignment?

    #126937
    Profile photo of BrianBrian
    Participant

    Great work!

    #126972
    Profile photo of RSRS
    Participant

    Right clicking on soft rotaries and entering values in Director is still broken here. Not listed under “known issues” either.

    #127066
    Profile photo of BrianBrian
    Participant

    I had no trouble right clicking in Director and entering a specific value. You need to right click on the numerical value listed below the rotary however, not the actual rotary knob itself. Perhaps this is the disconnect you are experiencing.

    #127074
    Profile photo of SteffenRSteffenR
    Participant

    Right-clicking the values is working on three different devices here. I use Windows.

    #127080
    Profile photo of RSRS
    Participant

    The problem is with aux/FX sends. Both on win and Mac. It’s acknowledged by A&H, but not in the “known issues” list.

    #127081
    Profile photo of RSRS
    Participant

    Proof video….

    #127085
    Profile photo of RSRS
    Participant

    Sorry, had to reduce size of the video first….

    Attachments:
    You must be logged in to view attached files.
    #127089
    Profile photo of SteffenRSteffenR
    Participant

    Ok, I can confirm it, after I watched your video.
    Hope it gets fixed in the next update.

    Not a showstopper to me.

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.