[TonmikeParticipant]

Just 2 Thoughts.

To save scenes for sure, you also have to archive the show, then a scene is really save.

The problem with the red “X” maybe has to do with the possibility that we can change the filter range from the parametric EQ since version 1.7?

Maybe the show you use is archived without the wide range and now you want to save a scene using the wide range from the parametrics and there the system runs in a conflict.

I don’t know if it helps but you can try.

Hope you understand my english.

Mike

[TonmikeParticipant]

I don’t think it has to do with the software version.

In my case it was also a IDR48/T112 and happened just two months after buying, in october 2009. Software was 1.5 or 1.6 at this time.
The motherboard is located in the IDR and after replacing it, the system works fine.

cheers Mike

[TonmikeParticipant]

AUX PRE / POST (Global)on surface

– Press the desired AUX MIX-Master
– Press and hold! PRE / POST (between fader banks)
– Press the AUX-Masters SEL at the same time

[TonmikeParticipant]

The same thing happened to me too and it was a defective motherboard. The German service has solved the problem quickly and easily, and since I never had another problem with the console.

But this happens also with other manufacturers and it is always bad for the one to whom it happens.

I even bought a second IDR and a R72 and I have never regretted it.
Don’t worry about that, when many units are sold, you may find a defect sometimes.

[TonmikeParticipant]

I’d like to see some changes in the matrix. Could you please change the point, where the main L/R signal is going to the matrix from Post Main EQ to Pre Main EQ? I dont like the Main EQ in the Matrix, cause it has its own.

Could we get the matrix a bit more flexible, so that we can send some channelsignals into, to create quick in ear mixes with maybe the main signal and the singers voice, as a “more me” mix?

Could you please change the function of the link button in the stereo delay to combine the two delaytimes in a absolute or relative way(i’d prefere absolut) instead of creating a monodelay? If I want a monodelay, i’d choose a monodelay in the library.

thx Mike

[TonmikeParticipant]

Hi Robc,

Thanks for your reply.

But what I mean is a flexible Matrix to feed with the Mastersignal + multiple input channels to create a simple In Earmix for a singer with his voice and the Mastersignal for example.
This is not possible at the moment.
The only way to do what i want, is to create a Group as a Mastermirror and then using an Aux to feed that Aux with the Groupsignal and any input Channel.

Why not a flexible Matrix?

Mike

[TonmikeParticipant]

I’d like to feed the Matrix with Single Channels also.

Thanks.

Mike

[Author]

Posts