[SeanDParticipant]

+1 on the Momentary Latch while holding a mix. I can see that as a good speed tool 👍

[SeanDParticipant]

+1

[SeanDParticipant]

Big +1 on this.

[SeanDParticipant]

Going to keep this one going +1. The red and dark blue are unusable to me as well.

[SeanDParticipant]

You could route your subs to an aux mix out and your Main LR to a matrix, then do your HPF on the Matrix end to keep your Mains bus free. I totally understand what you’re trying to achieve with your workflow, whenever I don’t have a processor, I’ll do this to keep the other 2 matrices open for front fills, media feed.

[SeanDParticipant]

My usual workaround for this is to route the “Listen L/R” in the “I/O – Outputs – Monitor out” tab to whichever local outs for studio monitors then set the Master Fader Mode to Listen level under the “Setup- Mixer Config – Role” tab. This way you don’t have to touch your Main LR fader and control output of your monitors while also retain your PAFL function within the studio environment and you will still have your 1/4″ out for the cans!

[Author]

Posts