Hi, you can only record a stereo mix on usb……

For VS, you’d need a pc/mac/with some rec software like reaper/protools etc (or a JoeCo box) … with either a dante/madi/soundgrid interface and a madi /dante/soundgrid card on the dlive

RayS

you can have that right on the dlive screen on the “user asiignable soft rotaries” it’s always available on a knob..

Ray

Hi, in the scene setup try selecting auto increment…and see if that helps.

Ray

I’ve uploaded a copy of the recently downloaded 1.80 here https://we.tl/t-UvA5EvmnyY

hope that helps some of you get by until A&H restores the links

Ray

YES If you click on the “not patched” or the arrow next to it you will get the menu. send it to direct out??!! or port b ace or whatever you use for recording..

Rays

NOPE, control button does nothing at all can’t even select the time…on this older El Capitan mac i Have to use command key.

Ray

I can dial in to the sample level, so 1 sample delay on the surface, but director stumps me at 15 samples using command/click….121 s. or 243 s. without command..

RayS

Not certain your problem is specifically related to the router itself..but, FWIW, We’ve replaced all our Dlive routers with Ubiquiti products..gateway pro 4/unifi AC pro access points/unifi Mesh…whatever you choose go “industrial”..the difference in stability and coverage is amazing and the whole system is expandable….Cisco also makes pro…[Read more]

Mr X,
no need to be condescendent,

we,re all actually talking about the same thing, Mike’s post states he agrees with other postersand and I do too.

Ray

I’d pick a Dlive over a x32 anyday…….and hire a monitor guy….I’m with Mike on this one……

Ray

Have a look:

https://www.youtube.com/watch?v=WLBhs_sXe9M. multirack setup

Ray

OK yes I see that too but it seems intermittent…I can get it to keep the softkey lit up for a while under 1.72….but when i go back to it a few minutes later it behaves as you stated……,

i used another softkey to keep the mix selected so I have also a blue softkey lit up…but i see what you mean, however on the screen we’re still in the…[Read more]

IF i try function =sel/mix/pafl/scene. and type = mix/pafl then the button turns yellow and functions as it should

or am i missing something?

R

Do You mean Sel/mix/pafl/scene ?

R

I’m not seeing this on my 1.71 s3000 surface nor in director, do you have the same issue in director?

RayS

Not in front of my console, but Could you make use of tie lines and keep direct outs for the broadcast unaffected by EQ or other channel processes ? you might need to add another Dante/Madi card ??

Ray

Hi,

a possible java “auto update” issue …Have you tried re downloading 1.95 and re installing..? I”m running 1.95 on High Sierra and mojave and after re installing the software is stable….

Ray

Hi, most likely different versions in ipad vs the mixer ex: 1.6x in dlive and 1.72 in mixpad) ..update the C2500 to the same version as the pad

R

Hi, most likely different versions in ipad vs the mixer ex: 1.6 in dlive and 1.72 in mixpad) ..update the C2500 to the same version as the pad

R