[RaviParticipant]

Hi GaryH, Thanks for all the help, it seems some setting on the mixer was creating issues, I reset the mixer to factory default and now everything is fine.

[RaviParticipant]

GaryH will try these out and let you know. Thanks a bunch for guiding me through.

[RaviParticipant]

Thanks once again GaryH for the detailed instructions. It worked well, but here is one more issue that I am facing. Of the 4 mono mixes, I am able to get an output from Mix 1 and Mix 4. Mix 2 & 3 does not have an output, in spite of doing the same for these two mixes as 1 & 4 there is no output from Mix 2 & 3. I have pushed the master fader for these mixes beyond the 0db, but there is no output levels also on the master faders for 2 and 3. Similarly I tried Stereo mixes 5&6 and 7&8, no levels from there too. Do I have to do something to activate these mixes? If so please let me know how to do it.

[RaviParticipant]

Thanks GaryH. the more fundamental question is what are the sequence of buttons that I have to press to assign a channel to a mix on my QU-Pad application, the manual for QU-Pad is not up to date and has buttons that are not available on the actual app. One more question is that can one channel be assigned to more than one mix, for example I want channel 1 to be in all the 3 mixes, Mix1, Mix2 and Mix3 but at different levels. Can this be done? Thanks in advance

[Author]

Posts