Forum Replies Created
-
AuthorPosts
-
2021/06/28 at 4:18 pm #1021072021/06/28 at 4:04 pm #102105
Sorry couldn’t attach photos to the message
2021/06/28 at 3:38 pm #102104All the keyboards on the photos are connected directly without any DI boxes, using XLR-TRS cables. That includes the Nords with unballanced output. All the cables are 3 to 5 metres. Worked without issues. Just ensure you set the preamps into “line level” – that preset is available on SQ.
2020/06/23 at 11:01 am #92788The issue has been successfully resolved. Alex A&H, your help was amazing!
Thank you very much!2020/06/07 at 4:50 pm #92391I downloaded from here:
2020/06/07 at 2:33 pm #92384I’ve done everything as per page 96 of the manual under “Files for multitrackplayback copied from a computer…” – all the files are of the same length/size, in a proper folder, with the correct naming, but it says: Unrecognised file format. The files are wav 24bit 48kHZ, and SQ is in 48khz mode
Multitrack recording, recorded on the SQ plays just fine.
What am I doing wrong? Any advice would be much appreciated.2020/06/07 at 5:31 am #92375Thanks, guys for your detailed responses.
Of cause I’ve seen your “guitarplayer” videos, Andre. Thanks a lot.2020/06/05 at 1:54 pm #92363Would it be possible to do the same with a virtual soundcheck, which was not recorded on SQ? I’ve got some, recorded at 24/96. I put it into Sq drive, in the playback folder. SQ can see/play individual tracks in the stereo mode, but when I select ‘multitrack’, it says: ‘no tracks found’
2020/06/05 at 12:19 pm #92359The previous usage is impossible, as there was a protective film on the screen and the small channel screens, and it was completely sealed, in a plasic bag and a factory box.
2020/06/05 at 11:07 am #92357oops, sorry guys, I posted the second photo before I’ve seen your response…
thanks, will do!2020/06/05 at 11:03 am #92356Here is another photo, showing the connector is actually a bit damaged… Not a big deal, providing it works. But how reliable it’s gonna be in the future? It would be nice to hear official A&H comments, please.
2020/06/02 at 5:32 pm #92306thanks 🙂
2020/06/02 at 1:08 pm #92303Awesome video! Thanks a lot! Please, please more videos about the WAVES card!
If I understood you correctly you don’t need any special WAVES software in order to connect SQ’s WAVES card to your Computer and send audio both ways?
Also, you mentioned you could use USB the same way. How worse the latency would be in that case? Any other disadvantages using USB? I do know you unable to use QU drive in that case 😉2020/06/02 at 5:04 am #92293Klaus, thanks for your response. What would you use if it’s “your party”? Would you mind to share details of your setup? Also, I been told that the above mentioned D’Addario adapters are of the highest quality with ‘golden’ connectors etc.
Still a couple of points need clarification or friendly advice:
1)If I understand correctly, to connect Nord equipment (or other unbalanced equipment), a DI box would be the best choice. I would appreciate any recomendation on the DI box models, which will not affect the sound quality. Also, is there any other options, if you use SQ on stage/ at rehersal/in studio? I just realized, my drum module and Supernova II rack also have unbalanced connections.. so it’s gonna be too much unbalanced stuff. Thanks:)
2)It’s still remains unclear, what is the “golden standard” to connect balanced TRS output of a keyboard/synh to the balanced XLR input on the SQ/stage box? There is no need of a DI box here, right? But it looks like some folks above do not support idea with trs/xlr adaptor as well as trs/xlr cable.. so I am totaly confused.
Sorry guys for too many questions etc. I really need help, as for the last 15 years I have been using my analog consoles and Midas MR18 at a later stage, where TS/TRS inputs were freely available. Now my SQ is on the way, and I will be selling my MR18 to finance DI boxes, cables etc, whatever you guys recomend me 🙂
…and again, it would be so nice to buy just one digital stage box where everything above mentioned already sorted (at 96kHz)! Still would love to hear A&H’s official opinion on that 🙂
Many thanks2020/06/02 at 4:23 am #92292Thanks Andre – it looks like the info you provided is freely available. It would be interesting to find out what the A&H plans are. what is their thoughts about making one pack, including all future plug-ins (same as for Avantis). It would be nice to pay once and ensure all future updates are included. Another example would be Eventide H9 Max – they are doing the same, and it’s a very nice approach.
-
AuthorPosts