Forum Replies Created

Viewing 15 posts - 1 through 15 (of 90 total)
  • Author
    Posts
  • #66660
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    It has side chain filter on the compressor isn’t that good enough for you 😉

    #66659
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    That is the way the system was originally designed to work.
    If you can’t get everything you want in the Aviom’s then group a few things on an Aux or group and feed that to one of the Aviom channels.

    #66658
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    Thanks for your input guys, this network is very limited, only 2 or 3 people on this router at most so traffic is very limited.

    #66379
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    Could really use a width slider in the PEQ section like the QU app has.

    #66378
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    I have had no issues at all.

    #65122
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    I just installed this one and it works great.

    TP-Link 8-Port Gigabit Ethernet PoE+ Rackmount Energy-efficient Switch with 124W 8-PoE+ Ports (TL-SG1008PE) https://www.amazon.com/dp/B00E6LID0S/ref=cm_sw_r_cp_tai_uKDRzb6YCGWSC

    #65121
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    I just installed this switch.

    TP-Link 8-Port Gigabit Ethernet PoE+ Rackmount Energy-efficient Switch with 124W 8-PoE+ Ports (TL-SG1008PE) https://www.amazon.com/dp/B00E6LID0S/ref=cm_sw_r_cp_tai_uKDRzb6YCGWSC

    Works great! With our ME 1s and GLD 112

    #65120
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    This is a big oversite, logins need to follow permissions.

    #65119
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    An extra custom screen or two would be great, I use I very different setup most evenings vs mornings, but most mornings are the same so I am always having to set up the screens again each time.

    Also ability to name Softkeys, we have many assigned to mute/unmute FXs but on the iPad you have to memorize what is what on the board we used a small label maker.

    Agree that login should follow permissions set on GLD but haven’t run into many problems yet as only two of use regularly use the app.

    Not sure why everyone needs another meter screen but it could be useful for some, I just use the meters on the faders as my meter screen, can watch my gates and compressors there too.(love it) 🙂

    #65118
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    I know this is an old post and I Hope you got this resolved, but here is my two cents.
    The fact that it is the same channel on both boards I would say you have a hardware problem.
    If it moved around or was on multiple channels I would suspect the cable first, make sure it is a Cat 5E or Cat 6 STP (shielded twisted pair).

    #65108
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    A&H recommends shielded Cat 5E for installs, and that’s what I used, but some of my shorter cables are not shielded and they are fine.

    #65102
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    You mentioned the levels changing are groups and DCA’s, they will change as they are output buses.
    The individual inputs can be raw feeds depending on settings of where the Dante is fed from.

    #65101
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    I noticed this too, a year ago they were working on a maintenance release firmware update, is it still not complete?
    @nicola

    #65100
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    Only problem I had was before I fixed the clock issue there was a clicking on many tracks.
    Been fine since.
    Some computers don’t handle screen going to sleep very well so I disable all sleep functions when recording.

    #65027
    Profile photo of Mrvoltz
    Mrvoltz
    Participant

    Matt the website says the following about the AB 168

    The rack’s rugged design, including rubber bumpers, renders it highly roadworthy and allows it to be placed on the stage floor during performances. Weighing in at just 4.8kg and featuring a sturdy carry handle, AB168 is also designed for maximum convenience and portability. An optional rack mounting kit is also available.

Viewing 15 posts - 1 through 15 (of 90 total)