[mr. y-munParticipant]

Sorry, I was too slow. Thanks guys!

[mr. y-munParticipant]

Let me check it for you asap.

[mr. y-munParticipant]

Thank you so much. That was the solution! Great!

[mr. y-munParticipant]

Yes, there’s signal on that channel
The pan setting is in center
The trim is pretty high.

Thomas

[mr. y-munParticipant]

Yes, that’s what I did. but I don’t get a signal on the track. May be I forgot a detail, but I don#t know which.

[mr. y-munParticipant]

Sorry for my late response. Couldn’t get my hands on the console in the meantime.

Perfect answer. That’s it. It works. Thank you so much. I appreciate it.

[mr. y-munParticipant]

I have one and do so. But it’s not overly cool to go down from stage too often. So I searched another way to do a rough check every now and then.

[mr. y-munParticipant]

I understand, that you have doubts. I don’t know whether this can work, but it’s not for real soundcheck, just a in-between check whether guitar volume is ok in FOH as we don’t have a sound engineer taking care of the FOH sound while we are playing.

Thanks so far. I’m not sure, whether I understood you correctly. I’ll try out and write back, if I have questions.

[mr. y-munParticipant]

I want to use these two mixes with IEM while playing. So headphone wouldn’t work. 🙁

The question is how to switch back and forth between the complete mon mix and FOH with more or less one or two buttons.

[mr. y-munParticipant]

You can go with patch cables form alt out to st1 or st2 inputs. These you can integrate into your mix 4 then.

Not the perfect solution as it means external patching. Anyway it should work.

[Author]

Posts