[moonParticipant]

I record 2 mics in M/S configuration in to channel 1&2 on the QU-16, then on to digital Performer
on a laptop. I throw on an M/S decoder and bring it back into the QU-16 for monitoring……..

[moonParticipant]

You can use a xlr splitter to feed the figure 8 microphone to two channels.
Then flip the polarity on one channel. Pan hard left and right.
Then your good to go.

cheers,
Mike

[moonParticipant]

I use a Lacie 500 gig drive formatted on the QU-16 and it works perfectly all the time.
I take recent recordings off the drive right away and store them for mixing on my
computer system. That way the Qu-16 is always empty when I do a new recording project.
cheers,
Mike

[moonParticipant]

I use the stereo line level inputs all the time as keyboard inputs
cheers,
Mike

[moonParticipant]

Hello,
You should be able to set the Delay FX unit to 100% wet.
This will give you what you want I believe.
cheers,
Mike

[moonParticipant]

This has nothing to do with FOH mix.
I have individual channel mutes setup and Fx mutes. That’s all good.
But when you have a Client jump on stage to do a speech or presentation
of some sort, it is really helpful to be able to mute all monitor mixes
quickly. Its just better that way.

cheers,
Mike

[moonParticipant]

I can’t find tap tempo softkey on the Qu-pad either.
It works great on the mixer itself.
cheers,
Mike

[moonParticipant]

Hi Lou,
I have used 1.2 on two gigs so far and its all
good. Having the names on the channel strips of Qu-pad is great
and the mute groups.
cheers,
Mike

[moonParticipant]

I use one the DCA’s to make that happen and another to mute all
monitor mixes.
cheers,
Mike

[moonParticipant]

I’d like to second Geddy’s requests and thank Allen and Heath for the new forum.
cheers,
Mike

[Author]

Posts