[MartinWParticipant]

Had a look at my desk last night.

The routing under QDrive Multitrack was all mapped correctly.

I didn’t have the USB drive connected so all buttons were non-functional.
I’ll try with the drive connected tonight to see if that changes the routing – I’m not expecting it to.

If that looks ok I think I’ll raise a query with support.

Cheers
Martin

[MartinWParticipant]

it’s possible that the lead vocals were muted when I started the recording, but I normally just mute foh.

Would be worth testing with a channel muted when recording starts then unmuting to see if it remains muted in the recording.

[MartinWParticipant]

i watched the video last night that showed the routing page for QDrive. I’ll check tonight if everything is correct in there.

[MartinWParticipant]

aha!

I did the “select a thread I don’t want first” and that fixed it.

I’ll try a refresh next time!

Cheers

[MartinWParticipant]

it’s working again.

Tried several times to update the original post, now I have managed to do it.

[MartinWParticipant]

THe forum has now let me post in this thread!

I was recording to an hdd plugged into the desk, should have said that in the original post.

(The hdd is defintely one from the approved list, I’ve used it several times with no problems)

Is it possible to mask/mute channels? I assumed all channels that are in use get recorded.

Maybe it is a routing problem, but not something I have deliberately changed since I last recorded using the same scene back in august.

Still haven’t been able to get to my QU16 to have a play, I’ll have it at home tuesday night.

Any suggestions where I can look to see if I’ve managed to mess up the routing to QuDrive?

Cheers
Martin

[MartinWParticipant]

Cool, thanks Guys chow I understand!

[MartinWParticipant]

ok I get that.

What I was actually asking was:

What function does FX return have when FX1 is selected ?

[MartinWParticipant]

Not with you GC – can you explain what you mean; I know what a feedback loop is, but why will it create one?

[MartinWParticipant]

Oops, I was being silly.

I copied the files to the root of the drive, should have been the ME1 folder!

[MartinWParticipant]

I’m trying to update form 1.11 to the current release 1.13

I’m using the usb key that I used last time to update me-1, also today to update qu16.

I did a fat32 format, then copied on the new firmware (M0.pad and M4.pad)

The ME-1 firmware update page says On USB: Not found.

But when I read the USB key in my pc, ME-1 has created ME1CFG and ME1PST folders, and the presets have been saved in ME1PST – PRESET.ME1

So why can’t I update ME1?

[MartinWParticipant]

Have you considered these:

https://www.widigitalsystems.com/

SoundOnSound have published a review

[MartinWParticipant]

This is what I currently use

https://www.ebay.co.uk/itm/5M-3-5MM-JACK-PLUG-TO-SOCKET-CABLE-HEADPHONE-EXTENSION-AUDIO-LEAD-MP3-/370848665436?hash=item56584d8f5c

I’m also considering getting this:

https://www.widigitalsystems.com/

wi audiolink pro

There’s a review in SoundOnSound magazine

[MartinWParticipant]

aha, thanks for the explanation XAP Bob

[MartinWParticipant]

errm – what is a channel ducker?

[Author]

Posts