Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #45941
    Profile photo of maartengeluid
    maartengeluid
    Participant

    Hello,

    I think that just making the subgroup signal not on/off but level controlled is all they need to do.
    Swapping of aux/groups is not necesarry, in that case you can have at least 4 mono or stereo aud sends extra.
    That would fit!
    Maarten

    #28282
    Profile photo of maartengeluid
    maartengeluid
    Participant

    Hi all,

    [:)]for the ‘pan’ delay.

    Implemeted in the normal channel pan screen, would be perfect.
    In this way you free up the subgroups en make the setup very simple.
    (Like the way you designed the parallelcompression, nice!).

    We were even thinking on a delay at the crosspoints (as TiMAX does…).
    That would me even more flexible, but a think a little bit DSP consuming.
    Maybe an option to give up some effects, to have more resources for the delay option?

    A simple ‘Pan’ delay would be fine as start [;)]

    Maarten

    #27583
    Profile photo of maartengeluid
    maartengeluid
    Participant

    +1 for the multiple PFL’s in editor/Ipad/dual surface…
    This can be the final descision to buy ;-)

    an idea: a delay on the crosspoints (input 1 – 10 ms delay to out 1, 12ms to out 2,…)
    With this feature you could have a small “timax” system.
    Even more value for money!

    #24435
    Profile photo of maartengeluid
    maartengeluid
    Participant

    Hi Lieven,

    Oops yes, just overlooked that you can have different tabs…
    thanks for the hint!

    About the second PFL, i think it should just be an extra “software” buss, routable to the mixrack?!

    best ragards,

    Maarten

    #24432
    Profile photo of maartengeluid
    maartengeluid
    Participant

    Hello Everybody,

    Just experiencing with my laptop and the editor (1.50) software.

    Bigger PFL/sel/Mix buttons would be wonderfull, maybe a separate “custom” screen for the mixbusses can be helpfull.
    Than you can make your own selection of masters/stereo-Mono auxes etc.

    I would like to use a tablet pc to do monitors onstage.
    A second PFL is then absolutely neccesary.

    Maarten

    #24431
    Profile photo of maartengeluid
    maartengeluid
    Participant

    Hi,

    i would like to have a second PFL/AFL bus, so i can do monitoring via my laptop/touchpad and have a wedge/in ear at the side of the stage, independent from what FOH is doing ;-).
    Second PFL/afl routable to the mixrack outputs.

    Also absolutely neccessary when a two console – one Mixrack setup would become possible.

    With this extra, the I-live can have something, nobody in the market can offer for the moment.

    regards,
    Maarten

Viewing 6 posts - 1 through 6 (of 6 total)