[LoloverdeParticipant]

Howdy

One should more often press the Setup button. There is a lot to find.

Senny:
You could work with scenes. Make one show where all your IP8 Settings are safed in a scene.
Import the scene through the scene manager into the show you need it. Recall the scene with the Global Safes on, except for the controller settings.

bye
Rainer

[LoloverdeParticipant]

WHere are you located?
Here in Germany I got one for 350€. Made by the local case builder.

[LoloverdeParticipant]

Howdy

I have no problem with it. I use the wheel to scroll in and out and click and swipe to navigate.

bye
Rainer

[LoloverdeParticipant]

It would be great to use one of the channel inserts for a standard compressor.

[LoloverdeParticipant]

Hold the CTRL button and the resolution gets finer.

[LoloverdeParticipant]

Howdy

I couldn’t find a solution for this:

dLive surfaceless project

bye
Rainer

[LoloverdeParticipant]

As a workaround you can patch the IEM output to the PA for the virtual soundcheck.
On that way I use the dLive as a studio desk.

[LoloverdeParticipant]

Chapter 9.5 in the Reference Guide.

[LoloverdeParticipant]

Howdy

From the hard logic, there is nothing to meter in a DCA group. It is a multiplier of the assigned channels. Shure you can calculate something like X32 does.

To minimize the number of faders with two kicks and two snare mics I use ganging (only fader active). Maybe a combination of groups and ganging can help you.

bye
Rainer

[LoloverdeParticipant]

Howdy

I have a mouse which can change the sensetivity. The minimum increment is 43cm. When I hold the ctrl button it is 5cm. It does not change with a different mouse setting.

bye
Rainer

[LoloverdeParticipant]

Howdy

On Director, if you push the Ctrl-Button it gets less coarse. Don’t know what button it would be on the surface.

bye
Rainer

[LoloverdeParticipant]

Howdy

This is already implemented. You can send custom Midi commands from any IP8 button.

bye
Rainer

[LoloverdeParticipant]

Hi

About the high battery drain:
I discovered that the CPU workload drops when Director runs in two separate windows. On my laptop with i5 CPU the workload drops from 30% to 4% when i enable the windowed mode. The same happened on another PC.

Does anybody had similar experience?

bye
Rainer

[LoloverdeParticipant]

Howdy

Found it. The error was in front of the desk 😉
“AMM Input to PFL source select” was Post Preamp. So under the headphone the EQ wasn’t working, but otherwise it was working.

bye
Rainer

[LoloverdeParticipant]

Howdy

To avoid this predicament I use always the same channels for a instrument.
Since my iLive times I have the following pattern:
1 – 16 Drums and percussion
17/18 Bass
19/20 Gtr
21-24 Keys
25-30 Vocals
31/32 CD

That covers 90% of my jobs and and patching additional instruments is a no brainer and I don’t have to move channels around.

bye
Rainer

[Author]

Posts