[JohannesKParticipant]

Thanks for your thoughts!

Actually I think I will try the L/R-Bandbus-version you mentioned instead. Till now I avoided it because I wanted to keep the possibility to have a Buss containing the whole sum which can be processed and send through a Matrix quickly anwhere I need it.

I already used Inputs as „Buss-returns“ on a SQ5 with a detour through Waves SG but I found it confusing and a bit risky…

And, as you mentioned, I won‘t have to deal with a complex time alignment for the Busses…

So, thanks again. 🙂

[JohannesKParticipant]

I didn’t had any issues after setting the Dante card to ‘Enable Sync to Ext’ and ‘Preferred Leader’ in Dante Controller but also changed the Mac and Dante card to a fix IP Adress. Unfortunately I wasn’t able to check the other setup till now but I’m confindent to fix this issue with these solutions! 🙂 Thanks again to everybody!

[JohannesKParticipant]

Thanks, but I already set it to 10ms…

[JohannesKParticipant]

The dLive AudioSync setting was Internal, the Dante Card was NOT SET to neither of the options! I tried and couldn’t hear any clicks. I will try on the second system as soon as I’m at the warehouse again.

Thanks a lot!!

[JohannesKParticipant]

Ah, ok! I found something about this on the DVS FAQ page: “macOS: DVS Clock Sync Locked / Unlocked” and the computers were Macs. I didn’t understand if the software should get me an error message if this happens so that I can be shure that this is the reason or not… On the other hand Audinate says, that this should not impact the audio!? Does anybody had this issue with really noticeable clicks? Or is there another way to handle this problem (I already used an external Network port at least on one of the computers) which is not mentioned in this DVS FAQ article?

[JohannesKParticipant]

“If you choose the IEM outputs(Stereo) or wedge (mono) you can also have a fader to control the level of your output with the IEM/wedge fader”

THIS is much more comfortable!

Thanks again!

[JohannesKParticipant]

@martijn: Ah, okay! I got it! I will try that! Thank you!

Generally I should have mentioned what I was tryin to do: I wanted to use the SIP-Fuction like the solo-button in a DAW while working on a Band pre production with VSC. I just build a workaround with using the PAFL and patching my monitor speakers to the PAFL-Outputs of my dLive. Then it actually works like I was expecting the SIP-Function…

Anyway, thanks everybody for your comments, that was really helpful!

[Author]

Posts