[cyrus100Participant]

+1

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

I had the same behaviour yesterday with 1.82, but only on one client out of four.
Furthermore, every startup of editor he loses more or less names, and it seems to be that only the first 16 channels are not recognized.
Probably it has something to do with the java version, because the clients run different versions…

Solution with renaming one channel functions except the channel coloring.
Second solution for me was the import of channel names tool (Tool cuts down the names down to five characters).

I will investigate that during the next days:)

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

We use BPM-Studio from Alcatech (only windows), which works so far without problems.

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

Have you already considered a bad wifi connection?

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

I think yes, the architecture supports multiple changes on different busses at the same time. We run at least 3 editor sessions at the same time, one is the keyboarder tweaking his own IEMs, the next one is the FOH, and the last one doing monitor mix.
We had never an issue, when different buses where mixed at the same time.
I think, that you are right the musicians don’t want to get in touch with technics, especially when it’s PC based. For this the interface must be as simple as possible , and there should be zero space to make a mistake…

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

Same from my point of view. It would be great, if the iLive has a more detailed user access control. And mixses assignable to users. I think this can be a configuration issue on the editor.
Probably like this, assignable right in the iLive right system is to create and administer users in the editor (so no detailed rights need to be stored on the iLive), the detailed right managment is than placed on the client system.
And so you can setup editor as you want.

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

I reviewed the presetation a second time, but there was nothing what I think causes this problem.
But today I have more time for testing and probably I will find the knot;)

Keep the fingers pressed, that you get your card soon.

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

Thanks for the link.
I tested this yesterday with the DANTE card, but VAC cannot get the ASIO driver for the DANTE.
Probably I made a mistake during configuration, but from my point of view I need an app that can talk to two soundcards at the same time.

The signal path should be like this

iDR32 –> DANTE –> ethernet –> ASIO driver (Dante) –> ?? –> laptop phones jack

idr32
Editor only (3 times)
Korg nano
Dante

[cyrus100Participant]

The problem from my view is, that the faders in editor have no adequate size to grab them with your fingers most of the time.
One of the really good features in the mixPad app is that the resolution increases when you move away from the fader.
Just one feature editor has not.

And I think mike is right when he already has a windows based tablet, costs are reduced when there is a similar app.

I am using the editor but sometimes I cannot grap the faders via the trackpad fast enough.
This is one of the reasons I will purchase an iPad soon.

idr32
Editor only (3 times)
Korg nano
Dante soon

[cyrus100Participant]

We will get ours on monday and are really glad to finally have an excellent recording platform.
Thanks to A&H/Audinate for the development, and keep on working

idr32
Editor only (3 times)
Korg nano
Dante soon

[cyrus100Participant]

Hi Mario,
I think you should not have any problem, even if you turn on all 48 PPs.
Once I used on our iDR32 all 32 PPs, and had no issue.

Further more I think the engineers @A&H have dimensioned the PSU to provide the power.

I think the DIN61938 is the paper you should scan trough, were you can find the maximum power consumption of phantom power which should be at 10mA imax.

So if you take the max of 48 mics with imax you have a total power consumption of 0,48A @ 48V this is around ~23W–> this should not be an issue for the PSU.

Correct me if I am wrong

HTH Klemens

idr32
Editor only (3 times)
Korg nano
Dante soon

[cyrus100Participant]

Great news, thx for the update

idr32
Editor only (3 times)
Korg nano
Dante soon

[cyrus100Participant]

As the mid of the week has already passed.
Is there any news?

idr32
Editor only (3 times)
Korg nano
Dante soon

[cyrus100Participant]

+1 for android as well

Editor is written in Java
Androids preffered language is Java
So it shouldn’t be the big thing, because all classes should be reusable

Correct me if I’m wrong

idr32
Editor only (3 times)
Korg nano
Dante soon

[cyrus100Participant]

Hi,
it was mentioned a few times above, but I want to push this topic:)
We would like to have some kind of room tuning tool in the GEQ/RTA section.
Today we are using a DBX Driverack, for the mains and doing the monitors manual.
I think it would be time/weight/cable saving to have this done by the system.

Another thing is, that I would like to have a more detailed user access system:
The situation is the following:
Our keyboarder also has editor installed to tweak his iem’s on his own. But he should not play with the rest
So optimum solution would be, just give him the rights on the IEMs and its mix.
Probably this is possible with some kind of different connection from editor, which just loads this special channels and IEM channel set as default mix.

Best regards

idr32
Editor only (3 times)
Korg nano
Dante soon

[Author]

Posts