[Clardy SoundParticipant]

I think I found a better way to describe what I want to do if anyone knows how I can adapt this workflow to the QU-24.

Remember the older Mackie analog boards? You can hit the mute button on a channel, which will mute the track, and route its audio to another stereo bus called ALT 3-4.

I want to use that same option to select which channel sources to send into my mpc for recording/looping.

Then I can run the output of the mpc back into the QU-24 and monitor the channel inputs of the MPC without creating a feedback loop, because the original track is muted in the monitors.

[Clardy SoundParticipant]

Is it possible to adjust mix output levels from line level to mic level? This might fix my issue. I’m using mix 5-6.

[Clardy SoundParticipant]

So if you try to move the faders against the motor to, will it damage the fader or motor? How do you write new automation in the middle of a song without destroying what automation you have already written?

[Clardy SoundParticipant]

I figured it out. I ran an update for Cubase and everything started working.

[Clardy SoundParticipant]

I’ve got each channel set to local. Usb set to stream over usb B. I was able to get audio to come through in Reaper, but not cubase. Another strange thing in cubase is if I hit record, then stop the recording the wav deletes automatically from the timeline. No signal records though. I’ve been using Cubase for many years with a firepod with no problems. I’m about to reinstall and try on a different computer. I’m also unclear on routing cubase outputs to my studio monitors, that are connected to he main outs on the board, if anyone can help explain this.

[Clardy SoundParticipant]

I’ve been trying to get the qu24 to record in Cubase 5 all day. I have successfully set up the custom layer to control midi, but I can’t get any tracks into Cubase. Can someone help me get set up? I’ve set up the VST connections as 24 mono inputs all routed correctly. On the QU24 under Setup/USB Audio I have each channel set to its corresponding channel. I’m not seeing any meters moving at all in Cubase though. Any ideas?

[Author]

Posts