[Tony T.Participant]

Hi Keith,

This happened when I had my SQ5 for 2 days.
At that point I probably assigned an (S-Link)input to more then 1 channel and channelstrip.
Now it’s a few weeks later and I created my own setup wrt setup channels and input.
If you force yourself to route an input to only one channel the chance to create an unwanted (and uncontrolled) audio path is less likely.
I used to have an Yamaha LS9. With that console its also possible to route inputs to multiple channels, but you can’t remove them from the surface, in other words they are always visable.

[Tony T.Participant]

Hi Steffen and Mfk0815,

Of course I can feed my Lexicion with any mix bus.
But as I said, I need mixes 1 to 10 for monitors.
So I was curious if it was possible to use Internal effectbus1 for connecting an external effect.
Conclusion is there’s no way to get a dry signal out of effect 1 (routed to a local output) to use as send for my Lexicon.
It would be nice if there’s a feature to ‘short’ input and output from an internal effect so you can send a dry signal to a (local) output.
I know it’s also an option to setup mixer for 12 auxes and 0 groups, but as I said I was just curious.

[Tony T.Participant]

Hi Steffen,

Thanks for your response.
As I wrote in my original post, Lexicon out is connected to stereo in1, that’s not the issue.
Sometimes I need 10 auxes for monitors, so I hoped I could connect Lexicion to FX1 bus in some way.
If there was a ‘though’ function in effect libray (what goes in comes out) it was no problem.
But what Yann said is the problem: You can send effect1 out to a local bus, but even if you set all effect parameters to zero, there’s alwasy something added to the original (dry) signal.

[Tony T.Participant]

Hi Yann,

I created an empty rack for effect 1, but then you can’t select eff1 bus.
Probably the best option is to select a suitable effect and set dry:effect to 100% and then route eff1 out to local out.

Regards,

Tony

[Tony T.Participant]

Great!
Two days ago I received my SQ5, so this update is timed perfect!
How many users can be connected to SQ at the same time?

[Author]

Posts