Hey!
I’m sending signal from my C3500 with a MADI card to a MADI interface into my iMac.
Using REAPER, I’ve got all the signals successfully coming in to the right spots when I enable ‘record send’ under virtual soundcheck on my surface.
Vox 1 goes to input 1, vox 2, input 2, etc. All is well!
The issue comes when I try to do virtual soundcheck.
Using totalmix FX, I’ve got software playback channels 1 through 6 routed respectively to hardware outputs 1-6.
Vox 1, when playing audio back in reaper, works great. In virtual soundcheck mode, the audio plays back as if it was Vox 1 on my surface.
Vox 2, the same.
Now, when I get to other channels (lets say Vox 4), I notice that the audio from REAPER in that channel is coming through channel 4 on my surface (good!) but it’s ALSO coming through channel 36, or other channels seemingly at random.
Why am I getting duplicate audio? Am I missing some sort of audio routing linking or something like that?
Thanks,
Joanthan
Attachments:
You must be
logged in to view attached files.
.
.
