Using scene Recall Filter

Forums Forums SQ Forums SQ troubleshooting Using scene Recall Filter

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of KeithJ A&H KeithJ A&H 5 months, 4 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #105960
    Profile photo of Tom Metz
    Tom Metz

    I was wondering if the channel routing is part of the processing block and you can’t block it if you want to change the routing of a channel from scene to scene, for instance adding a different aux.

    The manual says that the preamp filter affects the input channels and socket routing, excluding DEEP preamp models. What does that mean? I can’t find an explanation in the manual. I noticed however inserting the tube preamp model in a particular scene it will be recalled.

    Profile photo of KeithJ A&H
    KeithJ A&H

    @tom Metz

    The filters for routing options can be found in the ‘Mix’ tab, I think the one you want to allow here would be ‘Sends to Aux’.
    ‘Socket routing’ just means the source of that channel, ‘Processing’ includes DEEP Preamp emulation, HPF, Gate, PEQ and Comp, so you could block both of these and still change your routing on a scene-by-scene basis.

    Hope this helps!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.