USB-traffic

Forums Forums Qu Forums Qu general discussions USB-traffic

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #49038
    Profile photo of StonepianoStonepiano
    Participant

    I have a recording session in a couple of days at my rehearsal space, would like to know if both USB-sockets can be used simultaneously? I now have USB B feeding my Mac, and A going into the external hard-drive. Can I record to both at the same time?

    #49039
    Profile photo of DavidCoDavidCo
    Participant

    It should be absolutely fine to run both USB A and B outgoing simultaneously. Remember there’s a global USB A/B switch in the input channel source screen.

    DC

    #49040
    Profile photo of StonepianoStonepiano
    Participant

    Thanks David, will check it out when I get to the board.

    #49044
    Profile photo of AndreasAndreas
    Moderator

    Both run well concurrently, did exactly this several times. Full recording via USB A into a DAW and an additional QuDrive multitrack recording for backup purposes only.

    #49242
    Profile photo of tonmeistertonmeister
    Participant

    Tested this before I purchased, and the fact that it works was one of the main reasons I made the switch to Qu. Have done dual recording at every gig, and it has been absolutely flawless. One of the greatest benefits of Qu, in my book. 🙂

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.