UPS pure sine wave current

Forums Forums SQ Forums SQ general discussions UPS pure sine wave current

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #114222
    Profile photo of zeligonlinezeligonline
    Participant

    Hi. Was wondering if using an UPS (in pure sine wave current mode) to feed
    SQ 5 .. and another one to feed two DX168 on the stage, is a good idea..
    does it make any sense?
    Thx for your time and patience.
    Giorgio (Italy)

    #114228
    Profile photo of DasDas
    Participant

    It is never a bad idea. You should calculate the value of the expense. A good UPS is not cheap

    #114230
    Profile photo of nottooloudnottooloud
    Participant

    Modern gear has switching power supplies. They will turn whatever you send them into what they need. Unless there is actually a chance of power going off, you are simply adding another point of failure.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.